Sec S3c2443x Test B D Driver -

The Sec S3c2443x Test B D Driver is a reference implementation of a low‑level device driver for the Sec S3c2443x series of System‑on‑Chip (SoC) peripherals. It is primarily used in embedded Linux environments to validate the functionality of the “Test B D” hardware block, which provides a programmable interface for secure data handling, cryptographic acceleration, and DMA‑based I/O.

# Perform a secure DMA copy (user‑space program) ./testbd_tool --dma --src 0x80000000 --dst 0x81000000 --len 1048576 --encrypt

struct resource *res; int ret;

| Parameter | Meaning | |-----------|---------| | mode | 0 = buffer‑overflow test, 1 = timing jitter, 2 = fault‑injection | | iterations | Number of stress cycles (max 10 000) | | seed | Pseudo‑random seed for pattern generation |

struct sec_testbd_dma_desc SEC_TESTBD_DMA_DECRYPT */ ; The driver writes the descriptor into the SMI registers, triggers the transfer, and waits for the completion interrupt. Errors such as address misalignment or length overflow generate -EINVAL . Through SEC_TESTBD_IOCTL_CRYPTO , the user can request a single‑shot operation: Sec S3c2443x Test B D Driver

/* 3. Initialize hardware */ sec_testbd_reset(testbd); sec_testbd_configure(testbd, DEFAULT_MODE);

device_create(class, NULL, dev_num, NULL, "sec_testbd"); return 0; The Sec S3c2443x Test B D Driver is

/* 2. Request IRQ */ ret = devm_request_irq(&pdev->dev, platform_get_irq(pdev, 0), sec_testbd_isr, 0, dev_name(&pdev->dev), testbd); if (ret) return ret;